The bicycle you have purchased is a quality product. Nevertheless, as with other vehicles, you must look after the bike regularly and carry out regular maintenance work. This is the only way to guarantee the durable and safe function of all parts, as well as driving pleasure and safety over several years.

An initial inspection is particularly necessary after the first few kilometers, as the spokes of the wheels can settle to a certain extent, for example, or the gear cables can become elongated, which limits the proper functioning of the gears. Please contact one of our specialist dealers or a specialist workshop near you.

TYPE OF INSPECTION FOR NORMAL USE
(750 – 1500 KM OR 50 TO 100 H PER YEAR)
FOR INTENSIVE USE
(OVER 1500 KM OR 100 H PER YEAR)
the first inspection after 200 km or 2 months at the latest after 100 km or one month at the latest
The following regular inspection every 1500 km or once a year every 500 km or once a year
Checking the brake system (pads, discs, etc.) every 400 km every 200 km
Drive train check
Chain / belt every 500 km see also Gates user manual every 300 km see also Gates user manual
Crank / chainring bolts Chainrings / pulleys every 500 km every 300 km
Gear hub Alfine 11 speed: first service / oil change 1000 km / following every 5000 km or 2 years

Alfine 8 speed: Service every 5000 km or 2 years

Grease trains annually

Alfine 11 speed: first service / oil change 1000 km / following every 5000 km or 1 year

Alfine 8 speed: Service every 5000 km or 1 year

Grease trains annually

Derailleur function / wear check every 500 km

Grease trains annually

every 300 km

Grease trains annually

Control impellers
Tires Check tread depth, sidewalls and valve monthly Check tread depth, sidewalls and valve every six months
Rims Check concentricity and spoke tension monthly

For wheels with rim brakes, check the wall thickness of the brake track annually

Check air pressure*

Check concentricity and spoke tension every six months

For wheels with rim brakes, check the wall thickness of the brake track every six months

Hubs Check bearing clearance monthly

Regrease annually

Check bearing clearance monthly

Regreasing every six months

Frame & attachment parts check
Warehouse Headset bearing/inner bearing Check bearing play monthly

Regrease annually

Inner bearing housing (EBB) annual regreasing

Control head position/inner bearing Check bearing play every six months

Regreasing every six months

Inner bearing housing (EBB) Grease every six months

Seat post Check monthly

Remove & regrease annually

Check monthly

Remove & regrease every six months

Pedals Check bearing play monthly

Remove & regrease annually

Check bearing play every six months

Remove & regrease every six months

Nuts & bolts Check tightening torques monthly and retighten if necessary Check tightening torques every six months and retighten if necessary
Replacement handlebars, stem, seat post after a fall, as specified by the component manufacturer or every 5 years after a fall, as specified by the component manufacturer or every 2 years
Surface / cavity sealing Clean and preserve at least every six months

Cavity sealing with Fluid-Film AS-R recommended every 3 years

Clean and preserve at least quarterly

Cavity sealing with Fluid-Film AS-R recommended every 1.5 years

 

*MAXIMUMPERMISSIBLE TIRE PRESSURE

Rim Tire width Print
Kinlin 622 25 mm 8 bar
40 mm 4 bar
DT R500/G 1800 Spline 25 mm 8 bar
40 mm 5.2 bar
Shining 650 B 30 mm 6 bar
50 mm 4 bar

Please only have this service work carried out at the prescribed intervals in a specialist workshop and have it documented or confirmed in writing. This proof is required for any warranty and guarantee claims.

Do you still have questions?


Are you unsure about maintenance and care? Do you have questions about the individual steps? Or do you need help in general? Contact us or get in touch with a professional two-wheeler specialist!

0351 212 952 95

Mon. - Fri. 10:00 - 17:00 O'CLOCK